Repeater Frequencies and PL Tones




January 17, 2017 NEWS:

The SMLRS has a new repeater on the SMLRS system located in Warsaw, MO.

The repeater is on 147.075+ PL 127.3 Hz.  

You can run full PL on this repeater, meaning you must encode a PL of 127.3 Hz 
and you can also use decode on your radio for the 127.3 Hz tone. 

The 147.075 repeater is linked to the SMLRS 100% of the time via an RF link to 
the Stockton Lake hub repeater, and runs on 100% battery power 
like the 145.270 in Nixa.


Because the repeaters are permanently linked, a transmission on any of the six repeaters is re-broadcast on all repeaters.

You must ENCODE a tone, but you can also DECODE or run full CTCSS if you like.

block diagram oct 2014